Absolute Encoder

Incremental Encoder

ENB Serisi
o 1, 2, 5, 10, 15, 20, 25, 30, 40, 45, 50, 60, 75, 100, 120, 150,
200, 240, 300, 360, 400, 500, 512, 600, 700, 1000, 1024, 1200,
2000, 2048 impuls/tur'luk.
-Besleme gerilimi : 4,75-30VDC.
-Gövde çapı : 50 mm.
-Mil çapı : 8 mm.
-Ekranlı kablo, çift yönlü çalışmaya uygun.
-90 faz farklı 2 çıkış + referans çıkış olmak üzere
3 ayrı totem pole çıkış.

ENC Serisi Tekerlekli Tipler
-1 mm, 1 cm ve 1 m hassasiyetli 3 ayrı tip.
-Besleme gerilimi : 4,75-30VDC.
-İki yanda özel lastik kaplamalı iki tekerlek.
-Ekranlı kablo, çift yönlü çalışmaya uygun.
-90 faz farklı 2 çıkış + referans çıkış olmak üzere
3 ayrı totem pole çıkış.

E30S Series
Power: 5-24 VDC 5 VDC Line Driver Output
4mm diameter output shaft
NPN open collector, NPN voltage or Line Driver outputs available
Available 100, 200, 360, 500, 1000 or 1024 pulses per revolution
Quadrature output with or without Z (zero index) pulse

E40H Series
Power: 5-24 VDC 5 VDC Line Driver Output
6, 8, 10 or12mm diameter hollow shaft available
Totempole, NPN open collector, NPN voltage or Line Driver outputs available
Available 1 to 3600 pulses/rev
Quadrature output with or without Z (zero index) pulse

E68S Series
Power: 5 VDC
15mm diameter output shaft
Line Driver Output
Available 1024 pulses per revolution
Quadrature output with Z (zero index) pulse
17 pole connector for external connections

E80H-E100H Series
-E80H
Power: 5-24 VDC 5 VDC Line Driver Output
30 or 32mm diameter hollow shaft
Totempole, NPN open collector, NPN voltage or Line Driver outputs
Available 60, 100, 360, 500, 512 or 1024 pulses per revolution
Quadrature output with or without Z (zero index) pulse

-E100H
Power: 5 VDC
35mm diameter hollow shaft
NPN open collector, NPN voltage or Line Driver outputs available
Available 256/30, 1024/30 or 1024 pulses per revolution
Quadrature output with Z (zero index) pulse for Line Driver only
Used for elevator systems only

ENA Series
FOOT MOUNTED ENCODER
Power: 5-24 VDC
10mm diameter output shaft
Totempole, NPN open collector or NPN voltage outputs available
Available 1 to 3600 pulses/rev
Quadrature output with or without Z (zero index) pulse
4 or 5 pole connector
Flexible coupling included

ENH Series
HANDLE TYPE ROTARY ENCODER
Power: 5-24 VDC 5 VDC Line Driver Output
Totempole, NPN voltage or Line Driver outputs available
Available 25 or 100 pulses/rev
Quadrature output
Click stop position available either "High" or "Low" output
Suitable for manual positioning